 |
JIVA
EL/SL-5000 |
JIVA
PL-6000 |
JIVA
XL-7000 |
POS-2050/5050 |
PST-6000/7000 |
PB-6000/7000 |
| Back To POS
Products |
|
| |
 PST-6000/7000 Series
Integrated Celeron/Pentium EPOS Terminals - 30/01/03 - CAM |
|
| |
Introduction
The PST-6000 and 7000 series are a range of high
performance integrated terminals featuring either a 100Mhz Pentium (upgradable
to 233mhz) processor on the PST-6000 or a Celeron 566mhz (upgradable to 1Ghz)
processor on the PST-7000.
Available with 9" monochrome monitor
(PST-6000/7000), 10" colour monitor (PST-6060/7060) or even a 12.1" TFT LCD
screen (PST-6050/7050), to suit a wide range of users. Two types of keyboard
are available; a 112 key fully programmable keyboard to allow fast and
efficient data entry or an optional Qwerty keyboard with an additional 53 fully
programmable keys.
Although the printer is not an integrated part of
the terminal, a 24VDC power output cable to suit the Star SP2000, TSP200,
TSP600, TSP700 & TSP800 is provided as standard. |
|
|
|
 |
|
 |
| |
Features Include: |
|
|
|
Applications: |
|
| |
 100Mhz Pentium (PST-6000) or 566mhz Celeron
(PST-7000)
32Mb RAM, expandable to 128Mb (PST-6000) or 64Mb
RAM, expandable to 512Mb (PST-7000)
DOS preloaded
10.2Gb HDD
10/100 Base-T Ethernet
Connection
112 key fully programmable keyboard
6 position keyswitch with 5 page level control
Timed and Remote Wakeup via LAN or Modem
4 Serial, 2 CR, 1 Parallel & 2 USB connections
24VDC/2A printer power supply output
Optional
Features:
Magnetic stripe reader
UPS battery
Qwerty keyboard
2 x 20 line customer display
Windows 98, NT, 2000 or XP preloaded
CD-ROM drive
56K Modem
Pentium III 700mhz or 1ghz
processor upgrade (PST-7000 series only)
|
|
|
|
Retail
Restaurants |
|
|
|
|
|
|
|
|
| |
Downloads |
|
| |
PST-6000/7000 Manuals/Data
No Data Sheet |
|
|
 |
|
 |
| |
Additional Information |
|
| |
| Specifications |
PST-6000 |
PST-6030 |
PST-6060 |
| CPU |
100Mhz Pentium upgradable to
233Mhz |
| Memory |
16Mb EDO memory built-in, expandable to 192Mb
with 2 DIMM sockets and 2 SIMM sockets SDRAM optional |
| NV RAM |
32Kb Non volatile (64k optional) |
| Solid State Memory |
2nd level 256k (512k optional) |
| Floppy Disk |
1.44Mb |
| Display |
9" SVGA CRT Monochrome |
12.1" DSTN LCD Colour |
10" SVGA CRT Colour |
| Hard Drive |
2.1GB HDD |
| Operating System |
DOS Preloaded Windows 95 WindowsNT or UNIX
environment |
| Magnetic Stripe Reader (optional) |
1,2 & 3 track, 1 & 2 track or
JISII |
| Keyboard |
112 keys, fully programmable keyboard with
wedge architecture |
| Key Switch Control |
6 position key control for 5 pages, key lock
and hot key answer back code by control key position |
| QWERTY keyboard (optional) |
QWERTY PC keyboard integrated with an
additional 53 fully programmable keys |
| UPS Support |
Battery optional |
| Soft Switch |
Special design software shutdown
control |
| Power Saver |
In compliance with PC 97 ACPI and legacy PMU
standard |
|
|
|
|
|
| |
:: Additional
Information |
|
| |
| Interfaces |
PST-6000 |
PST-6030 |
PST-6060 |
| Parallel |
1 port, bi-directional |
| Serial |
4 Serial, power on COM2, COM3, COM4
enable/disable |
| AT Keyboard |
5 pin AT/DIN Connector |
| Cash Drawer |
1 kick out port, 12V (upgradable to 2 ports by
optional "Y" cable) |
| Network |
1 UTP 10 Base-T Ethernet with remote boot
capability |
| Printer Power Port |
24v, DC/2A |
| UPS Battery Port |
4 pin connector to attach 12v 2.3 Ahr sealed
lead acid battery |
| Operator Display |
15 pin VGA port with DC power for CRT
monitors |
Multi-pin LCD connector with power |
15 pin VGA port with DC power for CRT
monitors |
| Customer Display |
RJ45 (10pin) connector, controlled by
COM1 |
| USB |
2 Universal Serial Bus connectors 12
Mbit/sec |
| IRDA |
4 Mbit/sec IRDA infrared communication port
(optional) |
| Built-in IDE |
Support up to mode 4 and Ultra
DMA/33 |
| Expansion slot |
1/2 length PCI or ISA Bus Slot |
| Specifications |
PST-7000 |
PST-7060 |
PST-7050 |
| CPU |
Pentium II Celeron366 Mhz upgradable to
Pentium III 500Mhz |
| Cache Memory |
128Kb 2nd level CPU cache |
| Cache Memory |
32MB SDRAM upgradable to 512Mb |
| NV RAM |
32Kb Non volatile (64k optional) |
| Floppy Disk |
1.44Mb |
| Cashier Display |
9" SVGA mono monitor |
10" SVGA colour monitor |
12.1" colour LCD TFT |
| Customer Display |
2 line VFD with 11.3mm characters and a 33mm
by 215mm display area |
| Hard Drive |
4.3GB HDD |
| Operating System |
DOS Preloaded Windows 95 WindowsNT and Win2000
optional |
| Magnetic Stripe Reader (optional) |
either 1,2 & 3 track, 1 & 2
track |
| Keyboard Epos Version |
112 irrigated, fully programmable &
remapable. Epos keys - single, double, quad and number cluster on 23mm key
pitch for accurate check out use. 5 alternative pages of key
definitions |
| QWERTY keyboard |
QWERTY PC keyboard integrated with an
additional 53 fully programmable keys |
| Key Switch Control |
6 position key control for 5 pages, key lock
and hot key answer back code by control key position |
| UPS Support |
Built in UPS control inverter circuits to give
7 to 12 minutes power fail protection |
| Software Power Control |
All power functions are under software
control. No accidental power switch off by the operator. Essential for Win95 or
NT |
| Interfaces |
PST-7000 |
PST-7060 |
PST-7050 |
| Parallel |
1 port, bi-directional |
| Serial |
4 Serial, power on COM2, COM3, COM4
enable/disable |
| AT Keyboard |
5 pin AT/DIN Connector |
| Cash Drawer |
1 kick out port, 12V (upgradable to 2 ports by
optional "Y" cable) |
| Network |
1 UTP 10 Base-T Ethernet |
| Printer Power Port |
24v, DC/2A |
| UPS Battery Port |
4 pin connector to attach 12v 2.3 Ahr sealed
lead acid battery |
| Operator Display |
15 pin VGA port with DC power for monochrome
monitors |
| Customer Display |
RJ48 (10pin) connector, controlled by
COM1 |
| USB |
2 Universal Serial Bus connectors 12
Mbit/sec |
| External IDE |
External port to connect CD ROM drive for
Programme loading |
Order codes
| Item |
Contact PoS Sales |
| Please Contact PoS DED Sales For Details |
|
|
|
|
|
|
